Removing The Adf Cover Switch; Removing The Adf Stepping Motor - Ricoh ADF DF7010 Field Service Manual

Chapter 3 2 ADF Section

(9) Removing the ADF Cover Switch

1. Remove the ADF rear cover.
2. Disconnect the two connectors of the ADF
cover switch and one connector of the ADF
cover switch 2.
3. Remove the screw to remove the ADF cover
switch assy.
4. Remove the two screws to remove the ADF
cover switch and ADF cover switch 2.

(10) Removing the ADF Stepping Motor

1. Remove the ADF rear cover.
2. Remove the screw to remove the ADF cover
switch ASSY.
3. Disconnect the connector.
4. Remove the two screws to detach the motor
together with the bracket.
34
→See Page 27
→See Page 27
Screw
Connectors
ADF cover switch
Screw plate
ADF cover switch 2
ADF Cover Switch ASSY
Screw
ADF Stepping Motor
Screw
Connector
Connector
Screw
Switch bracket
Screw