Ricoh ADF DF7010 Field Service Manual page 66

Chapter 7 3 HELP Mode Functions and Operation Procedures
HELP-043
ADF READ WIDTH(mm)
000.0
5.
ADF READ LENGTH(mm)
000.0
6.
ADF FEED RANGE(%)
+0.0
7.
ADF TRAIL EDGE END POSITION(mm)
+0.0
8.
● Operation procedure
Call the HELP mode "H-043".
1.
Enter "043" by the NUMERIC keys and then press the
PRINT key.
Change the screen.
2.
Touch the arrow on the screen lower right once to switch to
Page 2.
Adjust the ADF read.
3.
Adjustment
1. Select and touch the item to be adjusted.
ADF read width
ADF read length
ADF feed range
ADF trial edge end position
2. Enter the value by the NUMERIC keys or change the
value by the PRINT POSITION
● Press the HOME key or PROPERTY key to invert "+"
and "-" of the selected set value.
● Press the C (clear) key to return the selected set value
to the value before change.
X
3. Press the
=
Return to the HELP mode.
4.
Press the STOP key.
The HELP mode selection display will reappear.
→ To exit the HELP mode
→ To access another HELP mode : Enter the desired mode number using the numeric keys.
64
(2) ADF Read Adjustment
Page 2:
● Adjustment.
ADF read width
ADF read length
ADF feed range
ADF trail edge end position
key to store the set value.
: Turn the power switch OFF.
(2 pages in total
HELP-043
HELP-043
keys.
)
ADF READ WIDTH(mm)
−0.6
1.
ADF READ LENGTH(mm)
+0.3
2.
ADF FEED RANGE(%)
+0.0
3. Touch
ADF TRAIL EDGE END POSITION(mm)
+0.0
4.
ADF READ WIDTH(mm)
000.0
5.
ADF READ LENGTH(mm)
000.0
6.
ADF FEED RANGE(%)
+0.0
7.
ADF TRAIL EDGE END POSITION(mm)
+0.0
8.