Chapter 3 1 Exterior
1 Exterior
(1) Removing the Document Tray
1. Lift the document tray directly upward, and
remove the document tray by pulling it off the
pins of the ADF unit.
(2) Removing the ADF
1. Remove the document tray.
2. Open the ADF.
3. Remove the three screws to remove the side
cover R, and cut the precut part.
4. Remove the lock-type cable clamp and screw,
and disconnect the connector.
24
→See (1) above
Pins
Lock-type cable clamp
Connector
Document tray
screw