Ricoh ADF DF7010 Field Service Manual page 27

Reinstallation
IMPORTANT
The cables should be secured with the lock-
type cable clamp above the line shown in the
above picture. If they are positioned below the
line, they may contact the frame while sliding
the scanner.
5. Remove the two screws, and slide the ADF
document cover 1 cm and pull it out upward.
Reinstallation
● When attaching the ADF document cover,
adjust the height.
a. Front side
Chapter 3 1 Exterior
Screw
ADF side
(feeding side)
Continue Page....
３
ADF
Ejecting side
25