Removing The Adf Feed Roller; Removing The Adf Document Jam Sensor - Ricoh ADF DF7010 Field Service Manual

Chapter 3 2 ADF Section

(5) Removing the ADF Feed Roller

1. Remove the ADF feed shaft assy.
2. Remove the ADF paper separator unit.
Reinstallation
IMPORTANT
● After reinstalling the ADF paper separator
unit, adjust its clearance.

(6) Removing the ADF Document Jam Sensor

1. Remove the ADF feed shaft assy.
2. Remove the two screws to remove the ADF
feed inlet.
3. Remove the four screws to remove the turn
guide.
4. Remove the screw, together with the bracket.
5. Disconnect the connector.
Remove the ADF document jam sensor.
32
→See (3) above
→See Page 41
→See (3) above
ADF paper separator unit
Screw
Screw
Screw
Turn guide
Screw
ADF document
jam sensor
Screw
ADF feed inlet
Screw
Screw
Bracket
Connector
Sensor