Table of Contents
Advertisement
Q
3. Run ipath_checkout or other OpenFabrics test program to verify that the
InfiniPath card(s) work properly.
4. Unload the InfiniPath and OpenFabrics modules with the command:
5. Remove the InfiniPath kernel components with the command:
The option
on
6. Verify that no InfiniPath or OpenFabrics modules are present in the
/lib/modules/$(uname -r)/updates
7. If not yet installed, install the InfiniPath and OpenFabrics modules from your
alternate set of RPMs.
8. Reload all modules by using this command (as root):
An alternate mechanism can be used, if provided as part of your alternate
installation.
9. Run an OpenFabrics test program, such as ibstatus, to verify that your
InfiniPath card(s) work correctly.
This information is repeated in
3.22
Installation Troubleshooting
If you have any difficulties installing the hardware or software, please
appendix C
contains information on problems related to installation, system administration, and
InfiniPath MPI issues.
IB0056101-00 C
# /etc/init.d/infinipath stop
$ rpm -e infinipath-kernel --nodeps
is required because the other InfiniPath RPMs depend
--nodeps
infinipath-kernel
# /etc/init.d/infinipath start
in the InfiniPath Interconnect User Guide. This Troubleshooting section
.
directory.
appendix C
in the InfiniPath Interconnect User Guide.
3 – Software Installation
Installation Troubleshooting
see
3-29
Advertisement
Table of Contents
