Pcie Slot In A Typical Motherboard - Qlogic InfiniPath Install Manual

Q
6. Determine if a blanking panel is installed in your chassis. If it is, remove it so
that the InfiniBand connector will be accessible. Refer to your system vendor
instructions for how to remove the blanking panel.
7. Remove the InfiniPath QLE7140 from the anti-static bag.
8. Locate the face plate on the connector edge of the card.
9. Connect the InfiniPath adapter and PCIe riser card together, forming the
assembly that you'll insert into your motherboard. To do this, first visually line
up the card slot connector edge with the edge connector of the PCIe riser card.
IB0056101-00 C
PCIe slot in
typical motherboard
Figure 2-3. PCIe Slot in a Typical Motherboard
2 – Hardware Installation
Hardware Installation
2-9