Related Manuals for Vents CBF LP 200
Summary of Contents for Vents CBF LP 200
- Page 1 USER’S MANUAL CBF LP 200/250 CBF LP 200/250 T/TH/TP CBF LP 200/250 LIGHT CBF LP 200/250 LIGHT T/TH/TP Centrifugal ceiling fan...
-
Page 2: Table Of Contents
• Do not use the unit in a hazardous or explosive environment containing spirits, gasoline, insecticides, etc. • Do not close or block the intake or extract vents in order to ensure the efficient air flow. • Do not sit on the unit and do not put objects on it. - Page 3 • The information in this user’s manual was correct at the time of the document’s preparation. • The Company reserves the right to modify the technical characteristics, design, or configuration of its products at any time in order to incorporate the latest technological developments.
-
Page 4: Purpose
CBF LP PURPOSE The centrifugal ceiling extract fan CBF LP is designed for extract ventilation of small to medium-sized premises. The unit is rated for continuous operation. THE UNIT MUST NOT BE OPERATED IN KITCHEN PREMISES. Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials, coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, pathogenic germs). -
Page 5: Technical Data
The unit design is constantly being improved, so some models may be slightly different from those ones described in this manual OVERALL AND CONNECTION DIMENSIONS OF THE FANS CBF LP 200/250 CBF LP 200/250 Light CBF LP 200/250 T/TH/TP CBF LP 200/250 Light T/TH/TP Dimensions [mm] Model Ø d CBF LP 200/250 40.5... -
Page 6: Design And Operating Principle
CBF LP 250 CBF LP 200 T/TH/TP CBF LP 250 T/TH/TP Parameter CBF LP 200 Light CBF LP 250 Light CBF LP 200 Light T/TH/TP CBF LP 250 Light T/TH/TP Frequency [Hz] Speed Voltage [V] 1 ~ 220-240 Fan power [W]... -
Page 7: Mounting And Set-Up
The fan casing is made of galvanized steel. The fan casing includes an exhaust spigot with a back draft damper to prevent back air flow. The terminal box comprises the terminals for wiring of the fan and is attached to the fan casing. The decorative grille is fixed to the casing via the springs inserted to the holders. - Page 8 CBF LP MOUNTING STEPS 1. Attach the fan to the interjoist using the screws. Vertical attachment to the beams on the wall is permissible. 2. Connect the air duct of a required diameter. 3. Connect the LED lamps (included in the delivery set) for the Light models. Option: connect the humidity sensor or the motion sensor (specially ordered accessory).
-
Page 9: Connection To Power Mains
CONNECTION TO POWER MAINS POWER OFF THE POWER SUPPLY PRIOR TO ANY OPERATIONS WITH THE UNIT. THE UNIT MUST BE CONNECTED TO POWER SUPPLY BY A QUALIFIED ELECTRICIAN. THE RATED ELECTRICAL PARAMETERS OF THE UNIT ARE GIVEN ON THE MANUFACTURER’S LABEL. ANY TAMPERING WITH THE INTERNAL CONNECTIONS IS PROHIBITED AND WILL VOID THE WARRANTY. -
Page 10: Control
CBF LP CONTROL CONTROL UNIT WITH A SPEED SWITCH HIGH Three-position speed switch The fan with AC motor is controlled by a three-position switch. The switch has three positions: — the fan is turned off. — the fan operates at reduced performance (speed 1). HIGH —... -
Page 11: Technical Maintenance
INDICATOR SYMBOLS OF THE MICROPROCESSOR CONTROL UNIT — turn-off delay timer adjustable from 1 to 90 minutes (default setting 15 minutes). — turn-on delay timer adjustable from 0 to 180 seconds with the increment of 10 seconds (default setting 0). —... - Page 12 CBF LP LAMP REPLACEMENT DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE ANY MAINTENANCE OPERATIONS! ENSURE THAT THE UNIT IS SWITCHED OFF FROM THE SUPPLY MAINS BEFORE REMOVING THE GUARD. 1. Remove the decorative grille: • Pull the grille to release the springs from the holders on the casing. •...
-
Page 13: Storage And Transportation Regulations
TROUBLES AND TROUBLESHOOTING TROUBLE POSSIBLE REASONS TROUBLESHOOTING Check the electric connections and the operation status of the No power supply. circuit breaker. The fan does not get started. Turn the fan off. Troubleshoot clogging of the impeller. Restart Motor jam. the fan. -
Page 14: Manufacturer's Warranty
CBF LP MANUFACTURER’S WARRANTY The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/EU of the European Parliament and of the Council, Low Voltage Directive (LVD) 2014/35/EU of the European Parliament and of the Council and CE-marking Council Directive 93/68/EEC. -
Page 15: Certificate Of Acceptance
CERTIFICATE OF ACCEPTANCE Unit Type Centrifugal ceiling fan Model CBF LP _______________________ Serial Number Manufacture Date Quality Inspector’s Stamp SELLER INFORMATION Seller Address Phone Number E-mail Purchase Date This is to certify acceptance of the complete unit delivery with the user’s manual. The warranty terms are acknowledged and accepted. - Page 16 V183-1EN-01...