Related Manuals for Vents CBF 110 DC TH
Summary of Contents for Vents CBF 110 DC TH
- Page 1 USER’S MANUAL CBF 110 DC T/TH/TP CBF 110 DC LIGHT T/TH/TP CBF 150 DC T/TH/TP CBF 150 DC LIGHT T/TH/TP Centrifugal ceiling fan...
-
Page 2: Safety Requirements
CBF DC CONTENTS Contents ......................................2 Safety requirements ..................................2 Purpose ........................................ 4 Delivery Set ....................................... 4 Designation key .................................... 4 Technical data ....................................5 Design and operating principle ............................6 Mounting and set-up ................................7 Connection to power mains ..............................10 Control ......................................... - Page 3 • Do not change the power cable length at your own discretion. Do not bend the power cable. Avoid damaging the • Unpack the unit with care. power cable. Do not put any foreign objects on the power cable. • Do not operate the unit outside the •...
-
Page 4: Designation Key
CBF DC PURPOSE The centrifugal ceiling extract fan CBF DC is designed for extract ventilation of small to medium-sized premises. THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE TRAINING. -
Page 5: Technical Data
TECHNICAL DATA The unit is designed for indoor application at ambient temperature from +1 °C up to +40 °C at max. RF 80 %. Ingress protection rating against access to hazardous parts and water ingress is IPX4. The unit design is constantly being improved, so some models may be slightly different from those ones described in this manual.. OVERALL AND CONNECTION DIMENSIONS OF THE FANS CBF110 DC T/TH/TP CBF150 DC T/TH/TP... -
Page 6: Design And Operating Principle
CBF DC TECHNICAL DATA CBF 110 DC T/TH/TP CBF 150 DC T/TH/TP PARAMETER CBF 110 DC CBF T/TH/TP CBF 150 DC Light T/TH/TP Frequency [Hz] 50/60 50/60 Supply voltage, [V] 100-240 100-240 Fan power consumption [W] Lamp power [W]* 2 х 10 2 х... -
Page 7: Mounting And Set-Up
The fan casing is made of galvanized steel. The fan casing includes an exhaust spigot with a back draft damper to prevent back air flow. The terminal box comprises the terminals for wiring of the fan and is attached to the fan casing. The decorative grille is fixed to the casing via the springs inserted to the holders. - Page 8 CBF DC MOUNTING STEPS 1. Attach the fan to the interjoist using the screws. 2. Connect the fan of a required diameter. 3. Connect the LED lamps (included in the delivery set) for the Light models. Option: connect the humidity sensor or the motion sensor (specially ordered accessory). For the Light models: connect the power socket of the LED lamp and the respective sockets in the terminal box.
- Page 9 BASIC FAN INSTALLATION OPTIONS Installation Side fixation Fixation between between the ceiling joists to one of the ceiling joists the ceiling joists using the mounting brackets Additional fastening holes in the fan casing may be used for mounting purposes www.ventilation-system.com...
-
Page 10: Connection To Power Mains
CBF DC CONNECTION TO POWER MAINS DISCONNECT THE UNIT FROM POWER MAINS PRIOR TO ANY OPERATIONS. THE UNIT MUST BE CONNECTED TO POWER MAINS BY A QUALIFIED ELECTRICIAN. THE RATED ELECTRICAL PARAMETERS OF THE UNIT ARE SHOWN ON THE RATING PLATE. -
Page 11: Control
CONTROL MICROPROCESSOR CONTROL UNIT WITH INDICATION The DC fan motor is operated by the microprocessor control unit. The front panel of the control unit comprises a light indicator, control buttons and two sockets for connection of the humidity sensor and motion sensor. Indicator Buttons Connection... -
Page 12: Maintenance
CBF DC SETUP OF THE OPERATION MODES : the fan is turned off. “60”, “70”, “80”, “90”, “100”, “110”, “120”, “130”, “140”, “150”: the fan runs to keep permanent air flow with set air capacity settings. The settings are displayed in CFM. The maximum air flow value is limited to 110 or 150 CFM, depending on the fan model. - Page 13 LAMP REPLACEMENT DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE ANY MAINTENANCE OPERATIONS. 1. Remove the decorative grille: • Pull the grille to release the springs from the holders on the casing. • Take out the lamp power socket from the respective socket on the casing. •...
-
Page 14: Storage And Transportation Regulations
CBF DC STORAGE AND TRANSPORTATION REGULATIONS • Store the unit in the manufacturer’ s original packaging box in a dry closed ventilated premise with temperature range from +5 °C to + 40 °C. • Storage environment must not contain aggressive vapours and chemical mixtures provoking corrosion, insulation, and sealing deformation. -
Page 15: Manufacturer's Warranty
MANUFACTURER’S WARRANTY The manufacturer hereby warrants normal operation of the unit for 24 months after the retail sale date provided the user's observance of the transportation, storage, installation, and operation regulations. Should any malfunctions occur in the course of the unit operation through the Manufacturer's fault during the guaranteed period of operation, the user is entitled to get all the faults eliminated by the manufacturer by means of warranty repair at the factory free of charge. -
Page 16: Acceptance Certificate
CBF DC ACCEPTANCE CERTIFICATE Unit Type Centrifugal ceiling extract fan Model CBF _______________________ Serial Number Manufacture Date Quality Inspector’s Stamp The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic Council Directive 2014/30/EU, Low Voltage Directive 2014/35/ EU and CE-marking Directive 93/68/EEC. - Page 17 www.ventilation-system.com...
- Page 18 CBF DC www.ventilation-system.com...
- Page 19 www.ventilation-system.com...
- Page 20 V166EN-01...