Related Manuals for Vents Lumis 100
Summary of Contents for Vents Lumis 100
- Page 1 USER’S MANUAL AXIAL FAN WITH INTEGRATED LIGHT SOURCE Lumis 100 V01-LUMIS-01_EN.indd 1 17.08.2015 11:09:14...
-
Page 2: Table Of Contents
CONTENTS Safety requirements Purpose Delivery set Designation key Technical data Unit design and operating principle Mounting and set-up Technical maintenance Transportation and storage regulations Manufacturer's warranty Acceptance certificate Seller information Installation certificate Warranty card V01-LUMIS-01_EN.indd 2 17.08.2015 11:09:14... -
Page 3: Safety Requirements
This user’s manual consisting of the technical details, operating instructions and technical specification covers the installation and mounting of the Lumis 100 axial fan with integrated light source (hereinafter referred to as «the fan» or «the unit» as mentioned in the «Safety requirements»... - Page 4 • Do not use damaged equipment • Disconnect the unit from power or cables when connecting the supply prior to any technical unit to power mains. maintenance. • Do not touch the unit controls • Do not wash the unit with water. with wet hands.
-
Page 5: Purpose
User's manual 1 item Power supply unit 1 item Fastening kit 1 item Packing 1 item DESIGNATION KEY Lumis 100 K L turbo Fan series Exhaust spigot diameter [mm] Non-return valve Ball bearings Increased capacity V01-LUMIS-01_EN.indd 5 17.08.2015 11:09:15... -
Page 6: Technical Data
Modifications and options: • Lumis 100 K - the fan is equipped with a back valve to prevent air back drafting (at customer’s request). • Lumis 100 L - the motor is equipped with ball bearings for longer service life (appr. 40 thousand hours) and fan mounting at any angle. -
Page 7: Mounting And Set-Up
MOUNTING AND SET-UP The ventilator is designed for ceiling mounting. The fan is mounted directly into the ventilation shaft. Flexible duct connection is recommended in case of the remote ventilation shaft location. The air duct is connected to the fan exhaust flange through a clamp. Fan mounting and connection. - Page 8 Fix the fan on the ceiling surface using the screws. Connect the power supply unit and install it in a false ceiling. Route the wires though the hole in the casing and install the fan in the air duct. Connect the connectors and install the lamp on the fan casing by turning it clockwise.
-
Page 9: Technical Maintenance
TECHNICAL MAINTENANCE V01-LUMIS-01_EN.indd 9 17.08.2015 11:09:16... -
Page 10: Transportation And Storage Regulations
TRANSPORTATION AND STORAGE REGULATIONS Store the unit in the manufacturer’s original packing box in a dry closed ventilated premise with temperature range from +5 °C to + 40 °C. Storage environment must not contain aggressive vapours and chemical mixtures provoking corrosion, insulation and sealing deformation. - Page 11 The manufacturer’s warranty does not apply to the following cases: • User’s failure to submit the unit with the entire delivery package as stated in the user’s manual including submission with missing component parts previously dismounted by the user. • Mismatch of the unit model and the brand name with the information stated on the unit packing and in the user’s manual.
-
Page 12: Acceptance Certificate
ACCEPTANCE CERTIFICATE Axial fan with integrated light source Unit Type Lumis 100 _________________ Model Serial Number Manufacture Date is compliant with the technical specifications and is hereby declared ready for service. We hereby declare that the product complies with the essential protection requirements of... -
Page 13: Installation Certificate
The unit operates normally as intended by the manufacturer. Signature: WARRANTY CARD Axial fan with integrated light source Unit Type Lumis 100 _________________ Model Serial Number Manufacture Date Purchase Date Warranty Period Seller Seller’s Stamp V01-LUMIS-01_EN.indd 13... - Page 14 V01-LUMIS-01_EN.indd 14 17.08.2015 11:09:16...
- Page 15 V01-LUMIS-01_EN.indd 15 17.08.2015 11:09:16...
- Page 16 V01-(Lumis)EN-01 V01-LUMIS-01_EN.indd 16 17.08.2015 11:09:16...
Need help?
Do you have a question about the Lumis 100 and is the answer not in the manual?
Questions and answers