Caple DD911BK Instruction Manual page 17

OT H E R F U N C T I O N S :
A U TO M AT I C T U R N O F F
After 4 hours of continuous working from the last function selection, the appliance turns off and
closes automatically.
G R E A S E F I LT E R S S AT U R AT I O N
After 30 hours of working, the speed indicators "D" will all flash simultaneously, signalling the
grease filters saturation.
To reset this alarm, hold down the "TIMER"button for at least 3 seconds, while the carriage
is open.
C A L I B R AT I O N
The cooker hood carries out its self calibration every 3 complete cycles of its extractable unit.
By pushing the "TIMER" key 6 times consecutively (MAX break between one push and the other
is 3 sec.) all the LED's will flash and the calibration will be reset.
After the next 3 cycles the downdraft will carry out its self calibration.
S TA N D - B Y
When the extractable unit is closed and the light is switched off, the control panel, after 6 seconds,
activates the stand-by function, reducing the brightness of the LED's.
This function can be stopped by pressing ON/ OFF or LIGHT key.
S E C U R I T Y S A F T E Y S YS T E M :
If there is an obstacle while the extractable unit is closing, the Downdraft stops closing and rises
again thanks to a security system.
WA R N I N G :
This operation has to be carried out by a specialised technician.
17
Instruction manual DD911BK
Please keep this instruction manual for future reference