Table of Contents
Advertisement
› Fix the downdraft inside the cabinet, using the
special fixing brackets supplied with the product
(Fig. 3). Insert the brackets in the lower side
of the downdraft (Fig. 3), in such a way that
there is a 2mm distance between the lower side
of bracket and the bottom of the cabinet (Fig. 3).
This distance will allow the traction to be positioned
downwards of the product, at the moment of fixing,
in order to have the stainless steel trim perfectly
adhering with the work surface. Before inserting
the screws, please make sure that the appliance is
perfectly perpendicular with the work surface.
› Once the installation is complete and after connecting the appliance to the mains power, lift
up the downdraft and remove the door block (Fig. 4); then open the door (Fig. 5) and fit the
filters in place (Fig. 6).
In the version of the Downdraft equipped with internal motor, install the power unit
orienting the air outlet to the desired position, either downwards or upwards (Fig. 7).
1
The motor can be installed either on the front or rear side of the downdraft. After installing
1
the motor, connect the air ducts.
3
3
5
5
10
Instruction manual DD911BK
2
2 mm
2
4
4
16
6
6
Please keep this instruction manual for future reference
1
2 mm
3
16
5
7
1
3
5
Advertisement
Table of Contents
