Table of Contents
Advertisement
› For versions with an external motor, place the
external motor in a suitable area and fit the exhaust
ducting as illustrated. Then fit the air outlet ducts
between the external motor and the downdraft.
Select an air outlet from the five possibilities (Fig. 9)
and fit the union supplied with the appliance.
› Place the metal box with the electronic
components in an easily reachable area for
eventual technical assistance operations. (Fig.
9), connecting the three connectors (9 pole
connector for the actuator control and the
safety control, 4 pole connector for neon lamp
turn on and push-button connector) (Fig. 10).
› Connect the internal or external motors cable to
the terminal board found inside the plastic box of
the downdraft wiring colours when performing the
electrical connection.
› Power up the cooker hood.
H O W TO U S E T H E E X T R A C TO R
This appliance is intended to suck cooking fumes, greases and some steam. It has been designed
to work in both ducted mode, with outside evacuation, and recirculating mode.
O U T S I D E - D U C T E D V E R S I O N
The cooker hood can be mounted in the version with outside discharge of extracted air: in this
case it is necessary to connect the exhausting channel/ducting to the outside (exhausting pipes are
not supplied with this product).
Check for a non-return valve blockage
WA R N I N G :
Before connecting the air exhaust hose, make sure that the non-return valves can move freely.
In case of outside air discharge installation, fit a non-return valve to prevent wind and back air
from entering.
Please keep this instruction manual for future reference
7
9
11
Instruction manual DD911BK
7
8
9
10
11
12
17
11
Advertisement
Table of Contents
