2.3 Peripheral Connections
2.3.1 Wiring of Alarm Input
The alarm input is an open/closed relay. To connect the alarm input to the device, use the
following diagram.
If the alarm input is not an open/close relay, please connect an external relay between the alarm
input and the device.
2.3.2 Wiring of Alarm Output
To connect to an alarm output (AC or DC load), use the following diagram:
ATM Digital Video Recorder Quick Start Guide
Figure 2-6 Wiring of Alarm Input
Figure 2-7 DC Load Connection Diagram
Figure 2-8 AC Load Connection Diagram
12