Live View - HIKVISION DS-8104AHQLI-K4 Quick Start Manual

Step 2 Select a custom protocol from the drop-down list, and configure its corresponding
parameters.
 Protocol Name: Edit the name for the custom protocol.
 Enable Sub-stream: If the network camera does not support sub-stream or the
sub-stream is not needed, leave the checkbox empty.
 Type: The network camera adopting custom protocol must support getting stream
through standard RTSP.
 Transfer Protocol: Select the transfer protocol for the custom protocol.
 Port: Set the port No. for the custom protocol.
 Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
Before customizing the protocol for the network camera, you have to contact the manufacturer of
the network camera to consult the URL (uniform resource locator) for getting main stream and
sub-stream.
Example: The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. E.g.,
rtsp://192.168.1.55:554/ch1/main/av_stream.
Step 3 Click Apply to save the settings and click OK to exit.
After added successfully, the custom protocol will be displayed in the drop-down list of
protocol on the Custom Adding interface.

3.12 Live View

Icons are provided on screen in Live View mode to indicate camera status. These icons include:
ATM Digital Video Recorder Quick Start Guide
Figure 3-22 Protocol Management
28