Peripheral Connections - HIKVISION ds-7200HVI-sh series Quick Operation Manual

Quick Operation Guide of DS-7200HVI/HFI-SH Series DVR
No. Item
1 V I D E O I N
2 V I D E O O U T
3 USB Interface
4 H D M I
5 V G A
6 A U D I O I N
7 A U D I O O U T
8 L A N Interface
9 RS-485 Interface
10 12V
11 P O W E R
12 G N D

Peripheral Connections

RS-485 Connections
To connect RS-485 devices (e.g., pan/tilt unit) to the DVR:
Press and hold the orange part of the pluggable block ; insert signal cables into slots and release the orange part.
Ensure signal cables are in tight.
Note:
Make sure the pan/tilt receiver unit is connected to the D+ and D- of the RS-485 terminal of DVR.
Table 2 D escription o f R ear P anel
Description
BNC connector for analog video input.
BNC connector for video output.
Connects USB mouse or USB flash memory devices.
HDMI video output.
DB15 connector for VGA output. Display local video output and menu.
RCA connector for audio input.
RCA connector for audio output.
Connector for LAN (Local Area Network).
Connector for RS-485 devices. Connect the D+ and D- terminals to T+
and T- of PTZ receiver respectively.
12VDC power supply.
Switch for turning on/off the device.
Ground(needs to be connected when DVR starts up)
4