Table of Contents
Advertisement
ATM Digital Video Recorder Quick Start Guide
Name
Description
Common
Enter the General Settings interface and Camera Settings interface.
Menu
Menu
Enter the main menu of the system by right-clicking the mouse.
Switch to the single full screen by choosing channel number from
Single Screen
the dropdown list.
Multi-screen
Adjust the screen layout by choosing from the dropdown list.
Previous
Switch to the previous screen.
Screen
Next Screen
Switch to the next screen.
Enable/disable the auto-switch of the screens.
Start/Stop
Auto-switch
The dwell time of the live view configuration must be set before
using Start Auto-switch.
Start
Start all-day continuous recording or motion detection recording
Recording
for all channels.
Add IP
A shortcut to enter the IP camera management interface.
Camera
Playback
Play back the video of the selected channel.
PTZ Control
Enter the PTZ control mode.
Output
Output Mode is configurable with Standard, Bright, Gentle and
Mode
Vivid options.
Switch to the auxiliary output mode and the operation for the main
output is disabled.
Aux Monitor
If you enter Aux monitor mode and the Aux monitor is not
connected, the mouse operation is disabled. You need to switch
back to the Main output with the VOIP/MON button on IR remote
control and then press the Enter button.
Display/Hide
Transaction
Display/hide the transaction information on the live view.
Information
Table 3-1 Mouse Operation in Live View
30
Advertisement
Table of Contents
