Atm Settings - HIKVISION DS-8104AHQLI-K4 Quick Start Manual

3.13 ATM Settings

Step 1 Go to Menu > Configuration > ATM.
Step 2 Check Enable ATM to enable ATM function.
Step 3 Select the input mode to Network Interception, Serial Port Interception, Network Protocol,
or Serial Port Protocol, which refers to the connection type of the ATM DVR.
Step 4 Click Setting to enter the settings interface of the input mode you select.
The following steps give the settings of Serial Port Interception as the example.
Step 5 Select the protocol for the input mode you select. And if the Network Interception or Serial
Port Interception connection type is used, you can also click Setting to enter the settings
interface to set the parameters.
ATM Digital Video Recorder Quick Start Guide
Figure 3-24 ATM Settings
Figure 3-25 Serial Port Interception
31