Chapter 3: Daily Cleaning
Step
Clean the Nozzle Tip, Drip Tray, and Cup Rest with warm water and Detergent Cleanser
using the Parts Brush. Thoroughly rinse with warm water.
3.
IV.
Sanitize the Removed Parts
Step
Submerge the parts in Sanitizer for 2 minutes.
1.
Note: Shake the Nozzle Tip when submerging into the Sanitizer to ensure no air pockets
remain. The Nozzle Tip should sink.
Remove the parts from the Sanitizer and allow them to air dry on a sanitary surface.
2.
Classified – Confidential
Action
Action
Page 7 of 46