Coca-Cola freestyle 7000 Memo

Memo: Coca-Cola Freestyle Extended Shutdown
(72 Hours or more) Re-open Procedures
We understand that business needs are changing rapidly in the food service environment. As a result of
the COVID-19 crisis, your Coca-Cola Freestyle dispenser may require additional steps to begin normal
operation again. The following procedures provide additional guidance for your 7000 dispenser(s). Should
you need additional help or support, please contact
and Video Chat. We appreciate your continued partnership and business!
Basic Cleaning
The following helpful parts for the basic cleaning protocols are available through Coca-Cola
Freestyle Small Parts Program. If you do not have the newest version of the nozzle and injector
ring brush part as shown below, previous versions of this part can be used.
Basic cleaning protocols for re-open include:
•
Clean and sanitize the ice bin and lid
•
If an ice maker is installed, follow the specific manufacturer guidelines for cleaning of ice
maker
•
Follow established cleaning procedures for ice chute and exterior surfaces. (refer to
the Freestyle 7000 User Guide if help is needed on this step)
Unclogging the Nozzle
•
As a result of the extended down time and reduced dispenser usage, more extensive
procedures are recommended for the nozzle injector ring and nozzle tip in order
to clear clogs and ensure quality beverages are pouring for guests.
o Remove the nozzle tip and soak it in warm water with food grade sanitizer
o While the nozzle tip is soaking:
▪
myCokeTech
Wet both ends of the angled nozzle brush in hot
water.
Classified - Confidential
(7000)
at 1-800-318-COKE (2653) - Phone Fix