Chapter 6: Annual Cleaning
Step
Continue to hold the line up and select the HIGH FLOW TEST button. Wait for the flow
from the Nozzle to stop.
3.
Repeat Step 3 10 times. This purges the Sanitizer from the HFCS line.
4.
Remove the Flush Adapter and connect a BiB of HFCS to the green BiB Connector.
5.
Select the HIGH FLOW TEST button. Wait for the flow from the nozzle to stop.
6.
Repeat Step 6 10 times. This primes the HFCS.
7.
Return the dispenser to the normal consumer dispensing screen.
8.
X.
Clean Remaining Parts and Surfaces
Perform all the steps describe in Chapter 3: Daily Cleaning.
Classified – Confidential
Action
Page 38 of 46