Chapter 3: Daily Cleaning
IV.
Sanitize the Removed Parts
Step
Submerge the parts in Sanitizer for 2 minutes.
1.
Note: Shake the Nozzle Tip when submerging into the Sanitizer to ensure no air pockets
remain. The Nozzle Tip should sink.
Remove the parts from the Sanitizer and allow them to air dry on a sanitary surface.
2.
V.
Clean the Nozzle
Step
Clean the outer Nozzle with the Thick Bristled Nozzle Brush dipped in Sanitizer until it is
visibly clean.
1.
Clean the inner Nozzle with the Wire-handled Nozzle Brush dipped in Sanitizer until
visibly clean.
2.
Page 7 of 28
Action
Action
CCFS2000 Cleaning