View Sensors - Macurco DVP-1200 Manual

Macurco TM DVP-1200 Manual
• OBJ INST NUMBER: Number in range 0 to 65535 are valid entries for Panel BACnet Object Instant Number.
MODEL NAME: Model name entered in this field will appear as device name for the panel in BACnet network.
•

4.6.5 VIEW SENSORS?

Menu path: Main Menu-->VIEW SENSORS-->
The VIEW SENSORS menu allows the user to view information about the sensors connected to the DVP-1200. Press the left/right
cursor to scroll through the sensors. To select a specific sensor without scrolling, select "Sensor: x" and press ENTER. Then, enter
the sensor address and press ENTER.
Sensor Description: Each sensor can be given a user defined description. The description is often used to describe the sensor's
location. To add or change a sensor's description, select Sensor Description and press ENTER. A screen with sensor address,
DESCRIPTION and SAVE will appear. Select 'DESCRIPTION' and hit ENTER. Then, use the alphanumeric keys to enter the
description and press ENTER. Sensor description is limited to 20 characters. Use RIGHT arrow key to move to next character or
to add a space and use DEL to delete last character entered. Once desired description is entered, SAVE the sensor description.
Sensor Description entered for each sensor will be displayed in ALARM, WARNING and TROUBLE screen if corresponding sensor
is one of the sources for the ALARM, WARNING or TROUBLE signal.
REV – 1.3.1
Figure 4-51 –
Figure 4-52 –
[34-8708-4770-7 ] 48 | P a g e