Technical Support - Macurco DVP-1200 Manual

Macurco TM DVP-1200 Manual
Event Log screen also shows current displayed event number starting from top (events are logged in chronological order i.e. last
event is the last entry in event log) and total number of events logged so far. Use the up and down arrow keys to scroll through
past events. Press LEFT arrow key to exit Event Log screen. To delete all events from memory, from the event log screen press
DEL. Then, press "0" followed by ENTER.

4.6.8 TECHNICAL SUPPORT?

Menu path: Main Menu-->TECHNICAL SUPPORT? -->
The TECHNICAL SUPPORT? menu item shows the contact information for Macurco technical support. It also displays the
currently installed firmware version and the serial number of the DVP-1200. If the Company Information and Phone Number of
the installation company was entered during initial power up, then it will be displayed in this screen. This information
(COMPANY and PHONE) can be entered or edited by pressing ENTER in the TECHICAL SUPPORT screen.
REV – 1.3.1
EVENT ABBREVIATION
Alarm ALM
Warning WARN
Relay Activation RLY OP
Table 4-3 – Event Log Abbreviations
Figure 4-57 – Event Log Screen
Figure 4-58 –
[34-8708-4770-7 ] 51 | P a g e