Removal & Re-Fitting The Glass Frame; Removal & Re-Fitting The Trim Assembly - Flavel Rocco HE FPHL RN2 Series Installation, Maintenance & User Instructions

5.10 REMOVAL & RE-FITTING OF THE TRIM ASSEMBLY
IMPORTANT NOTE : The trim assembly of this product is
a working surface and as such will become hot in use.
Allow the product and trim to fully cool prior to
attempting to remove it.
5.10.1 The trim is attached to firebox by 4 off magnets as shown below in
figure 14.
Fig. 14
Fit trim to firebox and
secure with 4 off
magnets as shown
5.10.2 Ensure the trim is securely fitted to the fire.
41