Table Of Contents - Flavel Rocco HE FPHL RN2 Series Installation, Maintenance & User Instructions

Section 1 Information and Requirements
1.0 Appliance information
1.1 Conditions of installation
1.2 Flue & Chimney Suitability
1.3 Shelf position
1.4 Hearths
1.5 Installation to plastered wall surfaces
Section 2 Installation of Fire
2.1 Unpacking the combustion chamber
2.2 Preparing the combustion chamber opening (In studded wall)
2.3 Preparing the combustion chamber opening (In chimney breast)
2.4 Securing the fire to the opening
2.5 Installation of the gas supply
2.6 Fitting the efficiency / flue restrictor baffle
2.7 Fitting the batteries to the fire
2.8 Removal & re-fitting of the glass frame
Section 3 Assembling Fuel Bed and Commissioning
3.1 Fitting the fuel bed logset
3.2 Making the gas connection & checking for gas tightness
3.3 Removal & re-fitting the trim
3.4 Fitting the batteries
3.5 Lighting the fire manually
3.6 Lighting the fire via the remote control handset
3.7 Checking for clearance of combustion products
Section 4 Maintenance
4.1 Removal of the burner assembly
4.2 Removal of the control valve
4.3 Removal of the pilot assembly
Section 5 User Instructions
5.1 Installation Information
5.2 About the Rocco HE room heater
5.3 Spillage monitoring system
5.4 Operating the Fire
5.5 Manual operation of the fire
5.6 Replacing the batteries
5.7 Cleaning instructions
5.8 Removal & re-fitting the fuel-bed logset
5.9 Removal & re-fitting the glass frame
5.10 Removal & re-fitting the trim assembly
5.11 User replaceable parts
Model number FPHL**RN2 manufactured by:-
BFM Europe Ltd. Trentham Lakes, Stoke-on-Trent, Staffordshire, ST4 4TJ
CONTENTS
2
PAGE
3
4
4
5
5
5
6
7
8-9
10
11
12
12
13
14-18
18
19
20-21
21
22-23
24
25
25-26
26
27
28
28
29-30
32-33
33
34
35-39
40
41
45