Flavel Rocco HE FPHL RN2 Series Installation, Maintenance & User Instructions page 17

3.1.5 Fit Log "D" into position on left hand side of the fuel-bed base log "A"as
shown below in figure 20, using the groove in Log "A" as a guide for
placement.
Fig. 20
3.1.6 Fit Log "E" into position at centre of the fuel-bed base log "A"as
shown below in figure 21, using the groove in the centre of Log "A" as a
guide for placement.
Fig. 21
D
E
16