Flavel Rocco HE FPHL RN2 Series Installation, Maintenance & User Instructions page 38

5.8.7 Fit Log "F" into position at right hand side of centre of the fuel-bed base
log "A"as shown below in figure 10, using the groove in Log "A" as a
guide for placement.
Fig. 10
5.8.8 Fit Log "G" into position at right hand side of the fuel-bed base log "A"as
shown below in figure 11, using the raised section in the base log as a
guide for position.
Fig. 11
Warning : Use only the logs supplied with the fire. When replacing the
logs remove the old logs and discard them. Fit a complete set of logs of the
correct type. Do not fit additional logs or any logs other than a genuine
replacement set.
F
38
G