Xg5000 Program; P2P Block Definition - Autonics TM-XGT Solution Manual

4 Data Exchange Example
4.2

XG5000 program

4.2.1

P2P Block definition

We will define 1 P2P block for each value that we want to transfer following the previously table, and
associate a specific conditionnal action flag to the different elements (for read or write).
In the project tree, double click on 'P2P Block' under communication module – [P2P 01].
1st
2nd Set the different table elements for the first line as following:
Item
Ch
Driver Setting
P2P function
Conditional flag
Command type
No. of variables
Data size
Destination station
Destination station number
20
Setting Note
2 XGT Channel number
Mod. RTU Clt fixed
READ Read or Write function
M10 Flag to trigger the communication
1. Single Select 2. if want to read several
word registers in 1 command
1 fixed
Enter value if read several word
registers in 1 command
Enable To define Modbus ID
1 Modbus ID of the targeted device
© Copyright Reserved Autonics Co., Ltd.