Error Codes - Graco 17G807 Operation And Parts

Error Codes

Codes
Error Error Codes
Code Code Code Icon Icon Icon Code Code Code Name
Alarms Alarms Alarms
J4AX J4AX J4AX Differential
J4BX
J4BX J4BX Differential
P6AX Pressure A
P6AX P6AX
Disconnected
P6BX P6BX P6BX Pressure B
Disconnected
3A3320D
Name Name LED LED Status LED Status Status
Flashing Red
Pressure
(A>B)
Flashing Red
Pressure
(B>A)
Flashing Red
Flashing Red
Alarms, Deviations, and Advisories
Cause Cause Cause
Ran out of B side material. Refill hopper or change
Cavitating B side pump.
B material leaking.
No mix manifold B side
restriction.
A side hose is too small.
Too much B side offset in
control setup.
Improper configuration.
Ran out of A side material. Refill hopper or change
Cavitating A side pump.
A material leaking.
Too much restriction
on mix manifold B side
restriction.
* B side hose is too small.
* No B side offset in
control setup.
Improper configuration.
Broken cable.
Disconnected cable.
Broken cable.
Disconnected cable.
Solution Solution Solution
drum.
Warm material or add feed
pressure.
Follow pump
troubleshooting in XP70
Sprayer manual.
Add restriction to B side
on mix manifold to balance
pressures.
Change to larger hose
size.
Adjust B side offset
in setup screens if B
normally runs at a higher
pressure than A.
Adjust setpoints on setup
screens. See Setup Mode
Details, page 22.
drum.
Warm material or add feed
pressure.
Follow pump
troubleshooting in XP70
Sprayer manual.
Reduce restriction to B
side on mix manifold.
Change to larger diameter
hose size.
Adjust B side offset in
setup screens if B nor-
mally runs at a higher
pressure than A. See
Setup Mode Details, page
22.
Adjust setpoints on setup
screens. See Setup Mode
Details, page 22.
Replace transducer.
Connect cable.
Replace transducer.
Connect cable.
15