Graco 207947 Instructions-Parts List

Instructions - Parts List
High Pressure Swivels
Models 207947, 196337, 207948
6000 psi (41 MPa, 414 bar) Maximum Working Pressure
Models 207946, 24P834
6500 psi (45 MPa, 448 bar) Maximum Working Pressure
Models 17G981, 17G980
7250 psi (50 MPa, 500 bar) Maximum Working Pressure
Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious
injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury.
• Do not exceed the maximum working pressure of the swivels.
• Always relieve pressure before removing, checking, or servicing the swivels.
• Do not stop or deflect leaks with your hand, body, glove or rag.
Model 207946, Series B, 17G981, Series A,
Model 24P834, Series A, and 17G980,
Series A
Straight Swivel; 3/8 npt(f) x 1/2 npsm(f)
Ref. Part Description
1 102918 SEAL, polyurethane (207946, 17G981)
111689 SEAL, PTFE (24P834, 17G980)
2 168667 WASHER
3 168666 HOUSING, seal;
1-20 UNEF-2A(m) x 3/8-18 npt(f)
Model 207947, Series B and
Model 196337, Series A
Straight Swivel; 1/2 npt(m) x 1/2 npt(f)
Ref. Part Description
1 102918 SEAL, polyurethane (207947 only)
111689 SEAL, PTFE (196337 only)
2 168667 WASHER
3 168670 HOUSING, seal;
1-20 UNEF-2A(m) x 1/2-14 npt(m)
WARNING
Qty. 3/8 npt(f)
1
1
1
1
Qty.
1
1
1/2 npt(m)
1
1

Important Safety Instructions

Read all warnings and instructions in this
manual before using the equipment.
Save these instructions.
2
1
3
Install seal (1) with
"V" facing into seal
housing (3).
2
1
3
307005F
EN
1/2 npsm(f)
01377
01380
1/2 npt(f)
01373