AXIS 5570e and AXIS 5670e User's Guide
Using the Test Button
The following operations can be performed by pressing the test button in specific sequences.
Please refer to Product Overview on page 4, to identify the location of the test button.
Print a Test Page:
Press the test button once to print a test page.
Print a Parameter List:
Press the test button twice to print a list of all parameters.
Perform a Factory Default:
1. Remove the external power supply to switch off the AXIS 5570e/AXIS 5670e.
2. Press and hold down the test button, while you reconnect the external power supply.
3. Continue to hold down the test button until the network indicator remains constantly lit. This
should take about 20 seconds.
4. Restart the AXIS 5570e/AXIS 5670e by disconnecting and reconnecting the external power
supply
.
Important!
All parameters are reset to their default values when performing a factory default with the test button.
Installed certificates and keys are not affected by a factory default.
Please refer to the AXIS 5570e/AXIS 5670e User's Manual for more information about the test
button.
59