Verifying The Communication Link - Axis 5570e User Manual

24

Verifying the Communication Link

1. Type WRKCFGSTS *DEV xxxx*, where xxxx are the first four characters of the printer
device name, on the AS/400 command line. A list of printers will be displayed. Make sure that
the printer session is Active.
2. Direct a printout to this printer device to check the integrity of the communication link.
3. Press the AXIS 5570e/AXIS 5670e test button once to print a test page. Make sure that the
TN5250E status is defined on the test page as Idle, Actv or LU-1.
Note:
If the setup fails, please refer to the troubleshooting section in the AXIS 5570e/AXIS 5670e User's Manual,
supplied on www.axis.com
Proceed to Print Server Management and Configuration on page 56 for information on supported
management and configuration tools.
AXIS 5570e and AXIS 5670e User's Guide