Configuring The Axis 5570E/Axis 5670E - Axis 5570e User Manual

20

Configuring the AXIS 5570e/AXIS 5670e

Note:
To perform the instructions presented in this section, you must first assign an IP address to your AXIS 5570e/AXIS
5670e using one of the methods presented in Assign an IP address on page 13.
After you have completed the procedures in The AS/400 Host System Checklist on page 18, follow
the instructions below to configure the AXIS 5570e/AXIS 5670e for SNA printing in the AS/400
environment using a Web browser:
1. Start a Web browser and enter the IP address or the host name of the AXIS 5570e/AXIS
5670e in the Address/Location field. Press Enter.
The internal Web pages of the AXIS 5570e/AXIS 5670e will appear:
Note:
To protect the admin pages and the Configuration Wizard from unauthorized use, enter a password (by default
set to Pass) in the Root Password field under Admin | General Settings.
2. Click the Configuration Wizard for IBM sessions button.
3. Click the Add Session button. This will start the Configuration Wizard which is a
step-by-step guide through the required IBM configuration settings.
AXIS 5570e and AXIS 5670e User's Guide