Configuring The Mainframe Host - Axis 5570e User Manual

AXIS 5570e and AXIS 5670e User's Guide

Configuring the Mainframe Host

1. Specify the TCP/IP address space name.
2. Define the Communication Control Unit, e.g. 3172, to MVS.
3. Modify the TCP/IP profile on your MVS system, if necessary.
4. Verify the communication between the AXIS 5570e/AXIS 5670e and the IBM Mainframe, by
pinging the AXIS 5570e/AXIS 5670e from the host.
5. Define the AXIS 5570e/AXIS 5670e as a writer-controlled printer to JES2 or to JES3.
JES2 Example:
FSS (FSS1) PROC=SAMPPROC,HASPFSSM=HASPFSSM,
PRT1 FSS=FSS1,MODE=FSS,PRMODE=(LINE, PAGE,),
CLASS=C,UCS=0,SEP=NO,SEPDS=NO,CKPTPAGE=100,
START=YES,MARK=NO,TRKCELL=YES
JES3(using JNAME=PRT1) Example:
FSSDEF,TYPE=WTR,FSSNAME=FSS3,PNAME=SAMPPRO3,SYSTEM=SYS1, TERM=NO
DEVICE,DTYPE=PRTAFP1,JNAME=PRT1,JUNIT=(,SYS1,,ON),FSSNAME=FSS3,
MODE=FSS,PM=(LINE,PAGE,),CHARS=(YES,GT12),
CARRIAGE=(TES,A868),CKPNTPG=100,HEADER=YES,WC=(C)
6. Define the printer to PSF with a PRINTDEV statement, including the IP address and port
number.
For a more comprehensive description of the setup procedures, refer to the AXIS 5570e/AXIS
5670e User's Manual on www.axis.com
27