Table of Contents
Advertisement
Problem solving guide
With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
Indicator lights or information in the time display
Problem
The indicator light
lights up at the end of
the programme.
lights up after a
programme has
been cancelled
and a signal tone
sounds.
lights up.
Bars flash in the display
at the end of a
programme:
.........
48
Possible cause and remedy
The fluff filters are clogged with fluff.
Clean the fluff filters.
Clean the plinth filter.
See "Cleaning and care".
To switch the indicator light off:
Open and close the door (with the dryer switched
on).
You can influence when the indicator lights up:
see "Programmable functions - Airways indicator
".
The drain hose is kinked.
Check the drain hose.
To switch the indicator light off:
Open and close the door (with the dryer switched
on).
The programme selector has been moved.
Select the original programme again. The time
remaining will appear in the display.
The programme has finished but the laundry has not
yet cooled down.
Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
Advertisement
Table of Contents
