Table of Contents
Advertisement
Cleaning and care
Inserting the plinth filter
Fit the plinth filter back on the handle
the right way round.
To ensure that the filter is positioned
correctly in the front of the heat
exchanger unit:
Insert the handle with the plinth filter
facing the right way onto the two
guide pins.
- The word Miele on the handle must
be the correct way up.
Push the plinth filter in completely.
Insert the right guide pin at the same
time.
Close the heat exchanger access
panel.
46
Damage or ineffective drying
when drying without a plinth filter or
with the heat exchanger panel open.
An excessive accumulation of fluff
can damage the dryer in the long
term. If the system is not leak-proof,
this can lead to ineffective drying.
You may only operate the dryer with
the plinth filter fitted correctly and the
heat exchanger access panel closed.
Advertisement
Table of Contents
