Table of Contents
Advertisement
Installation
Example: Connected directly to a
laundry tub or trough drain outlet
1. Adapter
2. Washbasin nut
3. Hose clip
4. Hose extension
5. Non-return valve and hose clips
6. Tumble dryer drain hose
60
Fit the adapter 1 to the drain outlet
using the nut 2.
If this nut has a spacer you should
take the spacer out first.
Attach the end of the hose 4 to the
adapter 1.
Use a screwdriver to tighten the hose
clip 3 up close to the nut.
Fit the non-return valve 5 to the
tumble dryer drain hose 6.
The non-return valve 5 has to be
fitted so that the arrow points in the
direction of flow (i.e. towards the
laundry tub).
Secure the non-return valve using the
hose clips.
Advertisement
Table of Contents
