Table of Contents
Advertisement
Changing the programme sequence
Changing a programme after it
has started
Programme selection is no longer
possible (protection against
unintentional changes). If you want to
select a new programme, you must first
cancel the running programme.
Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy
the dryer and the surroundings.
See "Warning and Safety
instructions" for further information.
If you move the programme selector,
will light up in the time display.
goes out when you select the original
programme again.
Cancelling the current
programme
Touch the Start/Stop sensor.
The items will be cooled down,
depending on the temperature reached
and how long they have been dried for.
will light up if you press the Start/
Stop sensor again during the cooling
phase.
Open the door.
Selecting another programme
Close the door.
Turn the programme selector to a
different programme.
Touch the Start/Stop sensor.
Adding or removing laundry
Open the door.
32
Risk of burning when touching
hot laundry in the drum.
You could burn yourself.
Let the laundry cool down and
remove it carefully.
Add or remove laundry.
Close the door.
Start the programme.
Adding laundry during the
Delay start period
You can open the door to add or
remove laundry.
- All programme settings will be saved.
- You can change the drying level, if
required.
Open the door.
Add or remove laundry.
Close the door.
Touch the Start/Stop sensor so that
the Delay start period continues.
Remaining programme time
Altering the programme sequence can
cause the programme duration shown
in the display to "jump".
Advertisement
Table of Contents
