Programming
You can use the programmable
functions to alter the dryer's
electronics to suit your requirements.
Programming is carried out in these
steps (, , ... ) using the
sensors.
Accessing the programming level
Before you begin, ensure the following:
- The programme selector is turned to
a programme.
- The door of the dryer is open.
Touch the Start/Stop sensor and
hold it down during steps -.
Close the tumble dryer door.
Wait until the Start/Stop sensor,
which will now be flashing quickly,
lights up constantly ...
... then release the Start/
Stop sensor.
will light up in the time display.
Programmable functions
Choosing and selecting
programmable functions
The number of the programmable
function will appear in the display as
and a number:
e.g. .
Touch the or sensor to scroll to
the next or previous programmable
function:
Programmable function
Cottons drying levels
Minimum iron drying levels
Cooling phase
Buzzer volume
Keypad tone
PIN Code
Conductivity
Control panel switch-off status
Memory
Anti-crease
Buzzer
Airways indicator
Backlight brightness dimmed
Confirm the selected programmable
function by touching the Start/Stop
sensor.
63