Table of Contents
Advertisement
Cleaning and care
Checking the heat exchanger unit
Risk of injury from sharp cooling
fins.
You could cut yourself.
Do not touch the cooling fins.
Look to see if fluff has accumulated.
If there is visible soiling:
Damage due to incorrect
cleaning of the heat exchanger.
The dryer will not dry if the cooling
fins are damaged or bent.
Clean using a vacuum cleaner with a
dusting brush attached. Only pass
the vacuum cleaner dusting brush
over the fins lightly, without applying
any pressure.
Carefully vacuum up any visible fluff
or dirt.
58
Inserting the plinth filter
Fit the plinth filter back on the handle
the right way round.
To ensure that the filter is positioned
correctly in the front of the heat
exchanger unit:
Insert the handle with the plinth filter
facing the right way onto the two
guide pins.
– The word Miele on the handle must
be the correct way up.
Push the plinth filter in completely.
Insert the right guide pin at the same
time.
Close the heat exchanger access
panel.
Hide quick links:
Advertisement
Table of Contents
