The Live View Page - Axis Q6035 User Manual

AXIS Q6035 PTZ Dome Network Camera
Accessing the product
Configure capture mode
Capture mode defines how image data is taken from the image sensor in regards to resolution and frame rate, prioritizing either one
or the other. Capture mode is set the first time the product is accessed. Select the desired Capture Mode from the drop-down list
and click OK. See also

The Live View page

If the Axis product has been customized to meet specific requirements, not all the items described below will appear in the Live View
page. The following provides an overview of each available button.
Controls on the Live View page
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Stream
profiles are configured under Video & Audio > Stream Profiles. See
Click Pulse to activate the output for a defined period of time, such as switching a light on for 20 seconds.
Click the Active/Inactive buttons to manually start and stop a connected device — e.g. switch a light on and off.
The Manual Trigger button can trigger an event directly from the Live View page. The button is configured under
Live View Config > Action Buttons.
Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your
computer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available.
Enable this button from Live View Config > Action Buttons.
Activate the product's fans with this button. Enable this button from Live View Config > Action Buttons. The Fan
button is activated automatically. Press this button to activate it manually.
Enable or disable the Gatekeeper by selecting On or Off from the drop-down list. The Gatekeeper is configured
under Setup > Events > Gatekeeper, see
AXIS Media Control viewer toolbar
The AXIS Media Control viewer toolbar is available in Internet Explorer only. See
information. The toolbar displays the following buttons:
Capture mode, on page 16
Stream Profiles, on page 16
page 33
.
AXIS Media Control (AMC), on page 11
8
.
for more