Audio Detection; Port Status - Axis Q6035 User Manual

Ptz dome network camera

Hide thumbs Also See for Q6035:

Table of Contents

AXIS Q6035 PTZ Dome Network Camera

Events

Audio detection

The Axis product can be conﬁgured to generate an alarm when audio rises above, falls below or passes the audio alarm level. The

alarm level can be set in the range 0–100 where 0 is the most sensitive and 100 the least sensitive.

1. Go to Events > Audio Detection.

2. Set the audio alarm level and click Save.

3. Go to Events > Event Types and set up a triggered event, see

Note

A multi-connector cable (available from Axis) is required when connecting external audio equipment to the Axis product.

Multi-Connector Cable (sold separately), on page 48

See

The list on the Events > Port Status page shows the status of the product's input and output ports. Inputs and outputs are conﬁgured

from the System Options > Ports & Devices page which requires administrator rights.

Note

A multi-connector cable (available from Axis) is required when connecting I/O devices to the Axis product. See

Multi-Connector Cable (sold separately), on page 48

Set up a triggered event, on page 31

Table of Contents

Q6035-e