Overlay Image; Privacy Mask; Audio Settings; Audio Channels - Axis Q6035 User Manual

AXIS Q6035 PTZ Dome Network Camera
Video and Audio

Overlay image

An overlay image can be used to provide extra information, or to mask a part of the video image.
To use your own image, such as a logo, first upload the image to the Axis product. Go to Video & Audio > Overlay Image, browse for
and upload the image file on the computer. The file can then be selected from the Use overlay image drop-down list.
To place an overlay image at specific coordinates, go to Video & Audio > Video Stream and select the Include overlay image at
coordinates check box option and enter the X and Y coordinates.
For more information see the online help

Privacy Mask

A privacy mask is an area of solid color that prohibits users from viewing parts of the monitored area. Privacy masks cannot be
bypassed via the VAPIX® Application Programming Interface (API).
The Privacy Mask List, Video & Audio > Privacy Mask, shows all the masks that are currently configured in the Axis product and
indicates if they are enabled.
The Pan/Tilt/Zoom coordinates of the privacy mask are locked in their position. This means that regardless of the angle and zoom
of the lens, the same place or object will be hidden. To define at what magnification the mask should be displayed, zoom to
the desired level and click Set level.
You can add a new mask, re-size the mask with the mouse, choose a color for the mask, and give the mask a name. You can configure
20 privacy masks and it is possible to use up to four privacy masks simultaneously.
For more information, see the online help

Audio Settings

The audio functionality for each video stream is enabled under Video & Audio > Video Stream > Audio.
Note
A multi-connector cable (available from Axis;
audio equipment to the Axis product.

Audio Channels

Select the type of audio transmission from the Audio mode: drop-down list. The different types are:
Full duplex - Simultaneous two-way audio allowing you to transmit and receive audio (talk and listen) at the same time. There is no
echo cancellation; if feedback loops appear, try moving the microphone or the speaker.
Half-duplex - Audio can be transmitted in both directions between the Axis product and the client computer, but only in one
direction at a time. You must actively receive sound using the Talk/Listen button visible in the Live View page (see
Control viewer toolbar
once to switch between speaking and listening.
The Talk/Listen mode is configured from the Audio tab in the AMC control panel (see AXIS Media Control on
Simplex - Network Camera speaker only - Audio is transmitted from the client to the Axis product and played by the speaker
connected to the product. To send audio, the Talk and Microphone buttons in the AMC toolbar must both be enabled. Click either
button to stop audio transmission.
Simplex - Network Camera microphone only - Audio captured by the microphone connected to the Axis product is transmitted from
the product to one or more clients.
). In Push-To-Talk mode, click and hold the button to speak and release it when done. In Toggle mode, click
Multi-Connector Cable (sold separately)
18
) is required when connecting external
AXIS Media
page 11
),