AXIS Q6035 PTZ Dome Network Camera
Hardware overview
•
Connecting to an AXIS Video Hosting System service, see
Status LED flashes green.
•
Connecting to AXIS Internet Dynamic DNS Service, see
•
Restoring the product to factory default settings, see
Multi-connector - Terminal connector for connecting external equipment:
•
Audio equipment
•
Input/Output (I/O) devices
•
AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product's IP
Multi-Connector Cable (sold separately), on page 48
rating, see
SDHC Memory card slot - A standard or high-capacity SD memory card (not included) can be used for local recording with removable
storage. For instructions on how to insert and remove an SD card, please refer to the Installation Guide.
Note
Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to Setup
> System Options > Storage > SD Card and click Unmount.
LED indicators
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgrade.
Amber/red
Flashes amber/red if network connection is unavailable or lost.
Red
Flashes red for firmware upgrade failure.
Green
Shows steady green for 10 seconds for normal operation after restart.
page 40
. To connect, press and hold the button until the
page 41
. To connect, press the button once.
page 47
.
.
5