Loading Printer Paper; Power Supply - VeriFone V240m Installation Manual

S
ETUP

Loading Printer Paper

Loading Printer
Paper
CAUTION

Power Supply

CAUTION
16
V240 I
M NSTALLATION
Use the following steps to load a roll of 57mm x 40mm thermal printer paper into
the compartment.
1
Unlock the paper compartment by pulling up the latch and swinging the door
downwards.
Figure 9 Opening Printer Paper Door
2
Load the paper roll as shown in Figure 10, with the edge of the paper on the
top of the roll.
Figure 10 Procedure for Loading Paper Roll
3
Pull a length of paper up over the serrated cutter and close the compartment
door.
Before processing transactions in battery mode, make sure you have more than
10% battery life. Do not risk losing transaction data or printing capabilities,
connect the terminal to the power pack if battery level is below 10%.
Not all configurations and device contexts require the use of a power supply –
Verifone ships power supply with the terminal as required.
Contact your Verifone representative If you have changed the context in which the
terminal is used or have questions about which power supply should be used.
Using an incorrectly rated power supply can damage the unit or cause it not to
work properly. Use only a power pack with VPN PWR
and Support for detailed power supply specifications).
G
UIDE
(see Service
265-013-01-A