Repair; Battery And Battery Tray - Jacobsen AR-3 Technical/Repair Manual

ELECTRICAL

Repair

Battery and Battery Tray

Removal and Installation
See Figures 4-48 through 4-50.
• Battery posts, terminals, and related
accessories contain lead and lead
compounds. Wash your hands after handling.
• Always wear eye protection when servicing
battery.
1. Park the mower safely. (See "Park Mower Safely" on
page 1-7.)
2. Raise and support the seat platform.
3. Remove OPS. (See "OPS" on page 9-4.)
4
3
1 2
9 10
Always disconnect the negative terminal first and
positive terminal last. Connect positive terminal
first and negative terminal last. Use care when
testing live circuits to prevent arcing. Arcing
could result in death or serious injury.
4. Remove the nut (1), flat washer (2), and screw (3),
and disconnect the negative (–) battery cables
(9 and 10).
5. Remove the nut (7), flat washer (8), and screw (6),
and disconnect the positive (+) battery cables
(4 and 5).
4-72
!
WARNING
4 5
6
7 8
Figure 4-48
!
WARNING
11
16
6. Remove two screws (13), lock washers (14) and flat
washers (15) and retainer bracket (16) from the
battery tray (12).
Never place used batteries in the garbage.
Dispose of used batteries in accordance with all
applicable regulations.
7. Remove the battery (11).
TN1050
NOTE
Perform steps 8 through 11 if the battery tray is to be
removed.
12
13 14 15
Figure 4-49
NOTICE
4181384 First Edition
TN1051