5. Install the eye bolt (8) in the hole in the top of the
smaller angle (2). Secure the eye bolt (8) in place
with two lock nuts (6). (Refer to FIG 2)
6. Connect one end of the tension spring (7) to the
large angle (1) mounted against the right hinge.
(Refer to FIG 2)
7. Connect the other end of the tension spring (7) to
the hole in the top of the eye bolt (8).
(Refer to FIG 2)
8. Adjust the spring (7) tension with the eye bolt (8)
and hex nuts (6). Secure the hex nuts (6) after the
eye bolt is in the desired position.
IB 340549 (5-02)
6
6
8
2
7
3