Tennant ATLV 4300 Instruction Bulletin page 2

3. Using the dimensions shown in figure 2, and the
smaller angle (2) as a template, mark and drill two 3/8
mounting holes in the right side hinge mounting
bracket. (Refer to FIG 1 and 2).
4. Mount the smaller angle (2) to the hinge mounting
bracket with two M08 hex screws (5), washers (3) and
M08 lock nuts (6). (Refer to FIG 2).
Mount 368662 to right hinge 367160
with hinge mounting hardware.
Rework hinge mounting bracket
367------ to mount angle 368663.
2
FIG. 1 - - Angle Mounting Locations
5
2
IB 340549 (5-02)
3