2. Enter Map Name and Note Information.
3. Click Configure Map to upload a map.
4. Click OK.
5.3.9 Restore Default
Before You Start
The cluster has been disbanded.
Note
There are two types of restoration, including restore and default.
Restore
Restore all parameters, except the IP parameters and user information, to the default settings.
As a result, the device will restart automatically and it needs to be activated again.
Default
Restore all parameters to the default settings. As a result, the device will restart automatically
and it needs to be activated again.
Steps
1. Go to System Management → System Configuration → Restore Defaults .
2. Select restoration type according to actual demands.
Intelligent Fusion Server User Manual
Figure 5-15 Person Pattern Configuration Interface
Figure 5-16 Restore Defaults Configuration Interface
54